Description
Controller Board for E-2, E-3, R-2, R-3, Evolution E1-4CB2 Control Board for Phoenix E2 Water Activated Tape Dispensers
No longer available as a separate part – when you order this item, we will contact you to tell you where to send your CPU keydrum to have it converted to the newer board
Located inside the key drum, the control board is secured to the underside of the top frame by 4 screws.
Quick Service Tip: If you turn your machine on and the pilot light is lit, but none of the length keys work it could be a bad board. First, check and replace the fuse. The fuse is a standard 3 amp 250v appliance fuse. Also check all the cables to make sure they are plugged in before replacing the control board
Control Boards are model specific. This board is for the Phoenix E2 and R2 ONLY
