Description
Control Board (Circuit Board) for Models 555es
Ref E555-002-01 Control Board for Better Pack 555eS Tape Dispenser
The most popular version of the 555e Series. this control board is for models that have a key pad that goes from 6″-45″
Quick Service Tip When you turn on your 555e machine it should make an audible beep. If you don’t hear the beep it could be the control board. But, you should check the fuse on the back of the machine. It is located just above where the power cord plugs in. There is a second fuse on the control board also located just under the large transformer. Check both fuses before replacing the control board
T0 Remove Control Board: There are 5 small screws that hold the control board to the frame. 4 are easy to spot. 2 towards the front of the board and 2 in the center of the board (next to the transformer. The fifth screw is hidden by the Connector Plate Assembly. Loosen the 2 screws on that plate and push the plate back to unscrew the fifth screw
Fits: Better Pack 555eS Models ONLY
Tigerseal 13093 Old Ridge Road Beaverdam VA 23105
Parts or Install Questions ? 1-800-899-9389 (9-5 M-F ET)
Quality Products, Superior Customer Support Since 1983
