Description
Controller Board for E-1 and R-1
E1-4CB Controller Board for Phoenix E1 Water Activated Tape Dispenser
Located inside the key drum, the control board is secured to the underside of the top frame by 4 screws.
Quick Service Tip: If you turn your machine on and the pilot light is lit, but none of the length keys work it could be a bad board. First, check and replace the fuse. The fuse is a standard 3 amp 250v appliance fuse. Also check all the cables to make sure they are plugged in before replacing the control board
Control Boards are model specific. This board is for the Phoenix E1 and R1 ONLY
